CO2 Diffuser

[Sleepy_lancs]

Hi All,

I am trying to get the ISTA's multi-function diffuser but I can't locate it either in Serangoon North's Petmart nor in C328. Does anyone knows where they have in stock. I need it urgently.

I am running it together with Eden 501. So far my research points that this is the best

PS: There is another similar product by Golden Angel, anyone used it before? Is it the same???

[blink_willie]

http://www.aquaticquotient.com/forum...highlight=type

They have what you're looking for.Different sizes too.Saw it for myself.

[Sleepy_lancs]

Hi Blink,

Thanks for the information. I forgotten that they have other types. I am looking for the multi-function version.

[blink_willie]

I see.Yeah,the place I mentioned doesn't have what you're looking for.I am using the normal Max Mix version.Not bad,really does the job well.

[Wackytpt]

Hi,

It's been awhile since we met.

You can try enquiring from Midori.

PS: PM me your msn messager

[Sleepy_lancs]

I just got it from C328.. hehe.. but expensive

[aquaSynthesis]

I just got it from C328.. hehe.. but expensive

are you using it as an external reactor or internal diffuser?

[aquaSynthesis]

Went to Colourful, NA and C328 just now. Can't find any. Asked the aunty in 328 she told me it's finished. Will come again next week..

this one popular?

[chingkt]

Went to Colourful, NA and C328 just now. Can't find any. Asked the aunty in 328 she told me it's finished. Will come again next week..

this one popular?

Not much detail from internet. Any review?

[Sleepy_lancs]

Let me present this to you.

Cost SGD $27 from C328. I think its expensive although it adds some "coolness" to the look - they call it high-tech (or dorky depending on the angle you are looking at).

I power it via my Eden 501. I think with 2 Bps, it still burps bubbles. Which means its not as efficient as I would like it to be. Perhaps a higher flow rate filter would be a better option. However, it that is true, then why bother with this device, I would rather get the MAX MIX CO2 REACTOR which I understand from the hobbyist here that it is very efficient. For my 1ft cube, its an overkill (but I am willing to try when I have the time... kekekk). I'll live with it now

[aquaSynthesis]

Let me present this to you.

Cost SGD $27 from C328. I think its expensive although it adds some "coolness" to the look - they call it high-tech (or dorky depending on the angle you are looking at).

I power it via my Eden 501. I think with 2 Bps, it still burps bubbles. Which means its not as efficient as I would like it to be. Perhaps a higher flow rate filter would be a better option. However, it that is true, then why bother with this device, I would rather get the MAX MIX CO2 REACTOR which I understand from the hobbyist here that it is very efficient. For my 1ft cube, its an overkill (but I am willing to try when I have the time... kekekk). I'll live with it now

thx for the heads up bro...
my 1ft tank is using Eheim 2211. Using ISTA Mix previously. Had a terribly hard time to get the bubbles out of the reactor (instructions say you have to invert it or turn it upside down until bubbles disappear). the output piping of my eheim 2211 is 9/12 (=10mm) so i had a hard time to connect it up to the ISTA reactor.

overall quite happy with ISTA Mix until i found that due to the bps which i think is about 3-5bps, the top of the reactor contains too much CO2 causing the spinner to cease operation. flow rate nearly came to a halt.

so right now using diffuser but thinking of a way to use reactor.