Advertisements
Aquatic Avenue Banner Tropica Shop Banner Fishy Business Banner
Page 1 of 2 12 LastLast
Results 1 to 20 of 27

Thread: need help

  1. #1
    Join Date
    Mar 2009
    Location
    yishun
    Posts
    49
    Feedback Score
    0
    Country
    Singapore

    Exclamation need help

    Advertisements
    Fresh n Marine aQuarium Banner

    Advertise here

    Advertise here
    i have problem cleaning my 4 ft by 2ft the water n the aglea marks cannot be clear it .,...so i need advise

    what should i do now...?

    pls help me to sovle this problem

    thanks


    water marks n some aglea

    some brown spot
    Last edited by fadhly; 10th Mar 2009 at 01:36.

  2. #2
    Join Date
    Jul 2008
    Location
    east sider
    Posts
    271
    Feedback Score
    0
    Images
    12
    Country
    Singapore

    Re: need help

    I had problem with water mark in my previous tank too. Tried using vinegar to clear it, did help a bit but still visible.. Consulted a glass makers in the end, he told me gone case for such water marks.. no way of getting rid of them.
    Hope some bro have some tips for this

  3. #3
    Join Date
    Mar 2009
    Location
    yishun
    Posts
    49
    Feedback Score
    0
    Country
    Singapore

    Re: need help

    Quote Originally Posted by feide View Post
    I had problem with water mark in my previous tank too. Tried using vinegar to clear it, did help a bit but still visible.. Consulted a glass makers in the end, he told me gone case for such water marks.. no way of getting rid of them.
    Hope some bro have some tips for this
    thanks bro will try to do it..

  4. #4
    Join Date
    Jul 2006
    Location
    Telok Blangah, SGP
    Posts
    10,216
    Feedback Score
    3 (100%)
    Images
    78
    Country
    Singapore

    Re: need help

    use kitchen tissue towel, soak it in white vinegar, stick it onto the glass and wrap it with cling wrap to prevent dry up. Leave it for half or one day, now you can use filter wool to scrap it. Don't expect it to be as clean as new, but you will see the different. You can try small portion first to see the different. It worked for me, it should work for you as well
    -Robert
    Aquascaping is a marriage between Art and Farming
    My Blog: http://aquatic-art.blogspot.com/

  5. #5
    Join Date
    Dec 2007
    Location
    Central
    Posts
    2,772
    Feedback Score
    1 (100%)
    Country
    Singapore

    Re: need help

    Vinegar works. For those areas that contain algae, just soak a piece of cotton there to prevent the vinegar from drying up too fast.

  6. #6
    Join Date
    Mar 2009
    Location
    yishun
    Posts
    49
    Feedback Score
    0
    Country
    Singapore

    Smile Re: need help

    Quote Originally Posted by Shadow View Post
    use kitchen tissue towel, soak it in white vinegar, stick it onto the glass and wrap it with cling wrap to prevent dry up. Leave it for half or one day, now you can use filter wool to scrap it. Don't expect it to be as clean as new, but you will see the different. You can try small portion first to see the different. It worked for me, it should work for you as well
    Quote Originally Posted by torque6 View Post
    Vinegar works. For those areas that contain algae, just soak a piece of cotton there to prevent the vinegar from drying up too fast.

    Thanks bro...just solve the problem

    by using vinger n a pen knife....but i was tinking went can i finish crapping the glass 4x2x2....haiya jialat n just finish crapping the front view glass, taking me 3 hours to finish the front view glass....

  7. #7
    Join Date
    Dec 2007
    Location
    Central
    Posts
    2,772
    Feedback Score
    1 (100%)
    Country
    Singapore

    Re: need help

    its like that, larger the tank, the more work , time and expenses... exponentially.

  8. #8
    Join Date
    Mar 2009
    Location
    yishun
    Posts
    49
    Feedback Score
    0
    Country
    Singapore

    Re: need help

    hehehehe...lolz

  9. #9
    Join Date
    Jul 2008
    Location
    east sider
    Posts
    271
    Feedback Score
    0
    Images
    12
    Country
    Singapore

    Re: need help

    Quote Originally Posted by fadhly View Post
    Thanks bro...just solve the problem

    by using vinger n a pen knife....but i was tinking went can i finish crapping the glass 4x2x2....haiya jialat n just finish crapping the front view glass, taking me 3 hours to finish the front view glass....
    hi fadhly, you manage to clear all the water marks? great for you
    I should have be more patient as I only soaked for 5 minutes

  10. #10
    Join Date
    Mar 2009
    Posts
    55
    Feedback Score
    0
    Country
    United_States

    Re: need help

    Using something abrasive after the acid treatment, like filter wool as suggested or even baking soda, can be less damaging to your glass. If you're not careful, a pen knife could scratch it up. Seems like you're pretty patient though, so probably not an issue.
    Otherwise, any strong acid will work for dissolving hard-water scaling. Vinegar is the most common as it's widely available and not dangerous like sulfuric or muriatic acid is if you're unfamiliar with how to handle it.

  11. #11
    Join Date
    Mar 2009
    Posts
    180
    Feedback Score
    0
    Country
    United_States

    Re: need help



    Wow... lots of scaling.

    If there are scratches after you're done and the aquarium is dry, maybe try some kind of scratch removing compound?

    I can't believe that only took vinegar and a sharp knife to clean.

    -Philosophos

  12. #12
    Join Date
    Mar 2009
    Location
    yishun
    Posts
    49
    Feedback Score
    0
    Country
    Singapore

    Re: need help

    Quote Originally Posted by Philosophos View Post


    Wow... lots of scaling.

    If there are scratches after you're done and the aquarium is dry, maybe try some kind of scratch removing compound?

    I can't believe that only took vinegar and a sharp knife to clean.

    -Philosophos
    Quote Originally Posted by Czyne View Post
    Using something abrasive after the acid treatment, like filter wool as suggested or even baking soda, can be less damaging to your glass. If you're not careful, a pen knife could scratch it up. Seems like you're pretty patient though, so probably not an issue.
    Otherwise, any strong acid will work for dissolving hard-water scaling. Vinegar is the most common as it's widely available and not dangerous like sulfuric or muriatic acid is if you're unfamiliar with how to handle it.
    Quote Originally Posted by feide View Post
    hi fadhly, you manage to clear all the water marks? great for you
    I should have be more patient as I only soaked for 5 minutes
    ya just try soak but it dunno effective to me...firstly i spread the vinger n use my finger nail to scratch so it work n i use a pen knife n work more effective so far no scratch yet(need to be more patient)...btw it smell very stink n salty issit will harm my plant n fish after i finish everything...

  13. #13
    Join Date
    Jul 2002
    Location
    Beauty World
    Posts
    7,114
    Feedback Score
    0
    Images
    789
    Country
    Singapore

    Re: need help

    fadhly,

    Please spell properly in our forums. You can use the edit button to correct your posts. Otherwise, they will be deleted.

    Cheers,
    I have dwarf cichlids in my tanks! Do you?

  14. #14
    Join Date
    Mar 2009
    Posts
    180
    Feedback Score
    0
    Country
    United_States

    Re: need help

    Quote Originally Posted by fadhly View Post
    ya just try soak but it dunno effective to me...firstly i spread the vinger n use my finger nail to scratch so it work n i use a pen knife n work more effective so far no scratch yet(need to be more patient)...btw it smell very stink n salty issit will harm my plant n fish after i finish everything...
    I've used bleach and H2O2 without getting all the water scaling off. Was it a salt water tank before? Soaking in tap for a couple of days then hosing out the inside very well might help with the smell.

    -Philosophos

  15. #15
    Join Date
    Mar 2009
    Location
    yishun
    Posts
    49
    Feedback Score
    0
    Country
    Singapore

    Re: need help

    Quote Originally Posted by Philosophos View Post
    I've used bleach and H2O2 without getting all the water scaling off. Was it a salt water tank before? Soaking in tap for a couple of days then hosing out the inside very well might help with the smell.

    -Philosophos
    before is fresh water

  16. #16
    Join Date
    Mar 2009
    Posts
    180
    Feedback Score
    0
    Country
    United_States

    Re: need help

    Is the smell still around? Does it just smell like salt or vinegar? Does rinsing help? If nothing else seems to be working, start with a mixture of NaHCO3 (baking soda) to neutralise any bits of vinegar. Be sure to put enough baking soda in to excede the level it precipitates at... even a mud-like slurry works. After, rinse it out VERY well and use some NaClO (bleach) in a 10:1 ratio, or 19:1 if you want to keep exposed skin a bit more safe. Rinse it again, maybe soak in some tap water for a while. Any of the more typical chemicals should be either neutralised into something more inert, or diluted until its harmless after going through this much effort. The smell may hang around in the corners; silicone seems to retain trace ammounts of aromatic compounds pretty easily.

    -Philosophos

  17. #17
    Join Date
    Mar 2009
    Location
    yishun
    Posts
    49
    Feedback Score
    0
    Country
    Singapore

    Re: need help

    This the picture i have done to my tank...






    Thanks to feide,shadow,czyne amd lastly thanks to philosophos teach me to clear the smell

  18. #18
    Join Date
    Mar 2009
    Posts
    180
    Feedback Score
    0
    Country
    United_States

    Re: need help

    Wow, it looks almost new. Nice to see that it cleaned up so well. What are your plans for it?

    -Philosophos

  19. #19
    Join Date
    Mar 2009
    Location
    yishun
    Posts
    49
    Feedback Score
    0
    Country
    Singapore

    Re: need help

    Quote Originally Posted by Philosophos View Post
    Wow, it looks almost new. Nice to see that it cleaned up so well. What are your plans for it?

    -Philosophos
    my plan is to get gex soil n bacter 100....

    plant ar HC(cuba) taiwan hairgrass and some moss and many more..

    some shrimp n tetra......want to make high tech

    by the way do i need co2 and a chiller...bacause my living room temperature 31 degree...

  20. #20
    Join Date
    Mar 2009
    Posts
    180
    Feedback Score
    0
    Country
    United_States

    Re: need help

    At temperatures that high, I'd think a chiller would be appropriate. From reading on the forums, it seems like the temperatures in Singapore are constantly high enough to need one. I'm surprised more people don't have air conditioners in their homes instead of aquarium chillers. I guess you've grown up with that kind of heat, though.

    HC is always nice. I got some recently for the first time; I expected it would be more challenging to grow. Instead, it's the H. micranthemoides that's ending up with the algae.

    -Philosophos

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •