What works real good is some fine grade steel wool with water and some vinegar if you like. It takes a bit of ellbow grease but it works. After you fill it with water you wont even notice the marks.



What fertilization method and lighting are you planning on? If it's going to be very high light and heavy fert dosing, you'd need CO2 to keep your plants out-competing the algae for nutrients. Otherwise you might be able to get away with medium lighting and ferts, DIY CO2 or heavy aeration and dosing Excel.
I wouldn't recommend going only high light or only high fert as both are limiting factors to a plant's growth rate along with CO2. Having one exceed the others only causes an imbalance that benefits algae, since your plants can only make use of light, ferts and CO2 as far as the first limiting component allows.
It might be costly to get pressurized CO2 up and running the first time, but it saves time and money in the long run. If you want true high-tech, then IMO it's very necessary. Can't wait to see that tank up and running either way, it looks 100% better![]()
What works real good is some fine grade steel wool with water and some vinegar if you like. It takes a bit of ellbow grease but it works. After you fill it with water you wont even notice the marks.
fertilization maybe not on it..lighting,now i using pl 30w x4 issit enough??
can diy c02 handle 4ft tank, because just read a couple of blog n they say it good for 30 gallon or less...or just double the yeast n suger in the 2l bottle???
by the way what is IMO??
Sorry for my silly Question..



IMO = In my opinion. What is PL? I see it referred to often on this site but am unfamiliar with it. Are the lights metal halide, compact fluorescent, etc?
If you're not dosing ferts then you might want to stick to around 2 wpg with a good spectrum. Also, what are your tank measurements? ( 4'x2'x?)
I haven't used the DIY method myself, but have heard success stories of people using it in larger tanks (50g+). The one thing that's kept me from attempting it so far is that the rate of CO2 production seems generally inconsistent, so in low-tech tanks I opt for heavy filtration/surface agitation and occasionally Excel. Hopefully someone more knowledgeable about DIY usage will give some adviceI bet consistent results could be produced after enough research, trial and error on someone's part.



The lights you have would amount to 1 wpg (watt per gallon) since your tank is 120 gallons. Unless you increase your lighting you'll only be able to grow lower light plants, but there are several that can do well in that amount of light.
Compact fluorescent lamps are just another form of lighting that's more efficient than most, save for metal halide and LED (and some say T5's are better also). They have a higher intensity and penetrate deeper than standard fluorescents, which makes them more suitable for deeper tanks, especially saltwater.
If you want to save your wallet, the lighting you have should be fine with no CO2 or ferts for lower requirement plants. High-tech can get really expensive. If you're still wanting to go that route then you'll probably need to supplement some fertilizers, double or triple your lighting, and invest in some form of CO2.
If you would like, creating a new thread outlying your current setup and equipment (and what you intend to add to it) might get you more replies and advice for setup options and requirements. This one has really deviated from its initial purpose, and I'm afraid many won't look past the initial problem being solved![]()
Bookmarks