






Nice setup! What is the flowrate of the canister? Enough to have a fast enough flow for the chiller? If not it will have issues kicking in and out.


saw it somewhere on the net, the flowrate is 360L/hr




yup.. that's wad it says on the box too. Chiller kicks in every hour.. Getting a little concerned that the flow rate of the filter might affect the chiller..
My nick is lizhien. But i'm not a girl. It's Li Zhi En. =) You can call me Cole too.
Never knew there was a hang on canister, interesting. Thanks for sharing such a wonderful equipment. But i think the flow rate might be slow for a 1.5ft tank. It will make your chiller kick in more often, unless your tank surrounding temp is low.




How long does the chiller kick in? 360l/h with media, you might be only getting 200+l/h.






this shrimps looks alittle different from the rest.. There's a golden part behind its head.. How come?
My nick is lizhien. But i'm not a girl. It's Li Zhi En. =) You can call me Cole too.




Chiller seems to be behaving weirdly. Kicks in at 26 degrees and out at 24.9 degrees. Then the temp on the display will climb to 25.7 before it stops and climbs slowly to 26. Now the in out interval is roughly 11 mins +-
My nick is lizhien. But i'm not a girl. It's Li Zhi En. =) You can call me Cole too.




Don't think so, I took out some of my media from my canister the other time and its running normally already till now.








wad kind of flow rate should i be looking for in the canister?
My nick is lizhien. But i'm not a girl. It's Li Zhi En. =) You can call me Cole too.
http://www.hailea.com/e-hailea/product1/HC-150A.htm
Above is the link for your chiller, maybe something in the middle of the recommended flowrate? I am using one with 700l/h for my 2 feet tank. You might want to get something with a control valve if you are going for something with a high flowrate so your tank would not be like a washing machine!![]()
Bookmarks