Ok what I meant is will the color of the fluid fluctuate between yellow blue green during on and off of CO2 ingestion?
Sent from my iPhone using Tapatalk 😁
My drop checker liquid is blue in color and it should slowing turning into greenish (more to lighter green) color if there is sufficient co2 in the water. Anything going towards yellow would mean an excess of co2, likewise darken green or blueish color indicate insufficient co2 in the water column.
Ok what I meant is will the color of the fluid fluctuate between yellow blue green during on and off of CO2 ingestion?
Sent from my iPhone using Tapatalk 😁
ImageUploadedByTapatalk1404821991.919338.jpg
It's like that now, CO2 is ON, will it change when CO2 is off then change again when it's ON again the next cycle?
Sent from my iPhone using Tapatalk 😁
The color does change as it is continuously reacting to the co2 available in the water column.
As I have quite a fair bit of live stocks in the tank, my change remains with the green (either lighter or darker). I do get bluish color the next day if I raise my lily pipe above the water for aeration during the night after co2 is off.
Ideally the Co2 drop checker should be displaying a green color when the lights are on... yellow color means the Co2 levels are too high and may affect fishes or shrimps.
Though if you don't have any livestock in the tank yet, then no issues with over-injecting Co2 and getting the yellow color.
Btw, did your drop checker come packaged with pre-mixed indicator solution? Or did it tell you to mix the solution with aquarium water?
Okay, if you mixed the indicator reagent with aquarium water, then the color readings will be inaccurate.
The drop checker changes color based on the pH and kH relationship in the water, but since your aquarium water pH and kH is already buffered by things in the tank like the active soil, wood or rocks, it throws off the readings. So if the tank water you use has lower pH and kH, the color in the drop checker may change to green even if there is not enough Co2 being injected.
You need to use 4dKH water (water calibrated with known pH of 7.0 and kH of 4.0) to mix with the indicator reagent, then the color readings will be correct.
Alternatively, you could also just get pre-mixed indicator solution and use that instead, much easier and less hassle.
Oh, so the LFS bloke did not tell me the truth. Where can I get 4dKH water. Do they also sell pre-mixed?
Sent from my iPhone using Tapatalk 😁
Last edited by kermit13sg; 8th Jul 2014 at 20:44. Reason: change
Well, most LFS staff also have no idea, they just follow the instructions too. Very few of them have actual experience with planted tanks and drop checkers.
You have to ask the LFS for 4dKH water, or mix your own with baking soda and distilled water... though you'll need a kH test kit and some mixing skills too.
Here is a guide on making your own 4dKH solution: http://www.plantedtank.net/forums/sh...ad.php?t=42429
Buying the pre-mixed solution is much easier... the ones i use are from the ISTA and Ocean Free brands, i got them from places like Polyart and Seaview.
Here is some info on them: http://www.aquaticquotient.com/forum...cator-Solution
Ok thanks, I'll go buy the pre-mixed..
Sent from my iPhone using Tapatalk 😁
I've replaced the CO2 indicator fluid to the ore-mixed by OF.
Should I start dosing fert, tank is 4 days old and I've done a 50% WC yesterday.
Ferts I have is BW LUSH and excel flourish.
Sent from my iPhone using Tapatalk 😁
Both should be dosed on a daily basis... the Excel will provide additional liquid carbon for the plants, complementing the Co2 injection (with a side effect of inhibiting some algae too).Originally Posted by kermit13sg;782101.
The BW Lush will supplement the essential macro and micro nutrients and avoid deficiencies from appearing. As it contains N and P, it'll be good to maintain regular weekly water changes to prevent too much of it from building up in the water.
Dosage as per instructions on bottle? Or is there a special formula you have tried and work better than instructions on bottles
Sent from my iPhone using Tapatalk 😁
For Excel, just follow the instructions on the bottle for a start, if no issues can increase dosage.... but if fishes or shrimps start dying or plants start melting (Excel can negatively affect some plants and livestock if overdosed), then reduce dosage.
For the BW Lush ferts, also start with the instructions on the bottle, if okay, increase dosage... but if you see algae start blooming (and you checked that lights and Co2 are not the causes), then reduce dosage.
Its all a matter of adjusting the dosages in small increments and observing the effects, every tank is different so you'll have to customize your dosages to suit it. Even as the plants grow in mass and when you trim them, their nutrient and growth requirements will constantly change too.![]()
Thank you so much for your help...
Sent from my iPad using Tapatalk HD
HI Urban
It has been a week or so since i started my tank, all that is in there are rotala and Monte Carlo. My CO2 indication fluid is green at one BPS. But my MC does not seem to be spreading even though I dose flourish and lush daily.
Do I increase bubble count? dose more fert? My LED lights and CO2 are on for about 4 hours daily, is that enough?
thanks and sorry to bother you again. I can show you a pic if you think it is necessary.
Sent from my iPad using Tapatalk HD
ImageUploadedByTapatalk1405511261.273486.jpg
Sent from my iPhone using Tapatalk 😁
Well, light is the main driver of plant growth.... so even with lots of Co2 and nutrients, if the light photoperiod is short, the overall plant growth will also naturally be slower too.
A 4 hour photoperiod is a relatively conservative length of time for the lights to be on, i guess you did it to avoid algae growth during the startup period. Although this method can help reduce algae growth, the side-effect is also slower plant growth.
Since you have Co2 injection and are dosing fertilizers, if you want to see faster plant growth, you can try increasing the photoperiod to 6 hours. If no algae issues arise, then progress on to 7-8 hours photoperiod.
Note that the plants also need some time to adapt and transition successfully to your new tank, once they do so they will eventually start to grow and spread out into a carpet.
Bookmarks