Advertisements
Aquatic Avenue Banner Tropica Shop Banner Fishy Business Banner
Results 1 to 9 of 9

Thread: need help !

  1. #1
    Join Date
    Mar 2009
    Posts
    158
    Feedback Score
    2 (100%)
    Country
    Singapore

    need help !

    Advertisements
    Fresh n Marine aQuarium Banner

    Advertise here

    Advertise here
    hi all im using aqua soil for my sub. the soil fien partticles tend to get trapped in the plant causing them to turn brown. how to cure this?

  2. #2
    Join Date
    Mar 2009
    Location
    armskote
    Posts
    12
    Feedback Score
    0
    Country
    Singapore

    Re: need help !

    bro i think u need to use a good filter to remove the fine particles from the water first and prevent it from getting onto the plants

  3. #3
    Join Date
    Mar 2009
    Posts
    158
    Feedback Score
    2 (100%)
    Country
    Singapore

    Re: need help !

    when i scape mt tank the particles then to cloud the water and then after it settles it lands on the plant. im using a top filter cause was recomened by the shop. but in this forum like everybody using internal filt

  4. #4
    Join Date
    Jul 2006
    Location
    Telok Blangah, SGP
    Posts
    10,216
    Feedback Score
    3 (100%)
    Images
    78
    Country
    Singapore

    Re: need help !

    I won't be surprise since you are using overheat filter, the downward flow stir the soil. You might want to change your filter or find a way to reduce/redirect the flow
    -Robert
    Aquascaping is a marriage between Art and Farming
    My Blog: http://aquatic-art.blogspot.com/

  5. #5
    Join Date
    Dec 2007
    Posts
    262
    Feedback Score
    0
    Country
    Singapore

    Re: need help !

    Quote Originally Posted by monstar View Post
    when i scape mt tank the particles then to cloud the water and then after it settles it lands on the plant. im using a top filter cause was recomened by the shop. but in this forum like everybody using internal filt
    when you stir the soil during a scaping, the soil particles will float around the water and they have to land somewhere. This will happen whether you are using aqua soil, or base fert , or any other soil. You just need to be very careful. I have had this problem for the longest time and recently managed to get it under a little control

    1) When you scape or rescape, remove 90% of the water and work with maybe 2 or 3 inches of water in the tank, this will keep the particles in the lower half of the tank when you fill it up with water again, it will not remove the particles altogether, but it will be much better.

    2) After you scape, put in a cheap internal filter, maybe about 400L/hr will do, and this will help to suck up the particles. This is what some hobbyist call "spot cleaning". I have tried it recently and it works quite well. It wont clear up all at one go, just stir up the plants to shake off the particles and the internal filter will do it's job.

  6. #6
    Join Date
    Mar 2009
    Posts
    158
    Feedback Score
    2 (100%)
    Country
    Singapore

    Re: need help !

    alright thanks all. my overhead filter got an L join to redirect the flow. but just wondering which type of filter is more advisable to use?

  7. #7
    Join Date
    Jul 2006
    Location
    Telok Blangah, SGP
    Posts
    10,216
    Feedback Score
    3 (100%)
    Images
    78
    Country
    Singapore

    Re: need help !

    canister filter hang on back isn't that bad but can't connect CO2 external regulator on it.
    Last edited by Shadow; 31st Mar 2009 at 17:55.
    -Robert
    Aquascaping is a marriage between Art and Farming
    My Blog: http://aquatic-art.blogspot.com/

  8. #8
    Join Date
    Dec 2007
    Posts
    262
    Feedback Score
    0
    Country
    Singapore

    Re: need help !

    Quote Originally Posted by monstar View Post
    alright thanks all. my overhead filter got an L join to redirect the flow. but just wondering which type of filter is more advisable to use?

    I have recently replaced my external cannister with a Fluval internal filter, so far so good. Filters like overhead and Hang On Back will probably causes loss in CO2, but there are people who has used HOB with success.

  9. #9
    Join Date
    Jan 2006
    Posts
    372
    Feedback Score
    0
    Images
    1
    Country
    Singapore

    Re: need help !

    Quote Originally Posted by monstar View Post
    alright thanks all. my overhead filter got an L join to redirect the flow. but just wondering which type of filter is more advisable to use?
    if you are into planted....the cannister will be the recommended one....

    Overhead or HOF will have problem of casing excessive loss of CO2 if you are into injecting CO2. there is also limitation on the positioning of the in and outflow.

    Internal filter have problem of taking up precious planted scape space and potentially heat up your tank (plants always do better in cooler water in our part of the world). maintenance is a little messier.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •