Usually you can simply cut them into the required shapes and slot them into the soil at steeper areas of the slopes to act as a support barrier, have to play around with the placements to find the best positions.
I guess you could use hotglue or any waterproof glue to secure the barriers in place too, just have to check and make sure the glue doesn't leech out any toxic compounds after its cured.
Only thing with the thicker plastic corrugated boards is they can still be visible initially when the soil moves and the plants haven't grown in to cover them yet. Alternatively, you could also look at using transparent plastic sheets instead (like from file covers or thicker transparency sheets), those will look more invisible.
There is a good example of plastic barrier setup done by hencpu on his aquascaped tank, he used flexible transparent plastic sheet to create a barrier between the soil at the back and sand bank in front, unless you look at the photos closely, you can barely notice the plastic sheet (only in the close-up photos then can see). Check out his thread:
http://www.aquaticquotient.com/forum...My-1st-Rescape
Yeah, like what Shadow mentioned, you can use other things to flatten the sand... no need to buy an over-priced spatula.
Only those chaps who post youtube videos of themselves aquascaping use sand flatteners, make the process look like mystical "zen" style. In reality, most people just use their bare hands to shape and level the substrate.
Bookmarks